The use of super thin cutting disc not only improves the productivity of cutting but now the cutting disc has become the cutting device that many users now choose, especially the use of 4 1/2 super thin cutting disc. The characteristics of the cutting disc affect the performance of the grinding wheel cutting disc: the grinding wheel is the most important type of grinding tool in the grinding process. The cutting wheel disc is a porous body which is prepared by adding a binder to an abrasive, compacting, drying and baking. So what is the effect of the characteristics of the cutting disc on the performance of the cutting disc?

Characteristics Of The Cutting Disc On Performance

• When the thickness of the cutting disc is large, the slit is wide and the grinding wheel consumes a large amount; when the strength is guaranteed, the smaller the thickness, the better, which saves the grinding wheel and saves the material to be cut; when the flatness is large, the slit width is determined by the thickest part. The strength is determined by the thinnest part, and the wear is large and the vibration is large, which affects the entire cutting process.
• When the super thin cutting disc has large radial runout, the vibration is large at the initial stage of cutting, which tends to cause the grinding wheel to fall off, affecting the strength and cutting, but is automatically trimmed after cutting, and the overall influence is small.
• When the end of the super thin cutting disc is large, the swinging is repeated back and forth during cutting, and the cutting width is large. The material to be cut is unnecessarily consumed, and the consumption of the grinding wheel is naturally large and has a great influence.

Knowing the impact of the characteristics of the cutting disc on the performance of the cutting disc can make better use of the cutting disc and better choose the right cutting disc device.